a42072ddf4
This patch fixes an issue with the broadcom.sh configuration script when enabling sta mode. Currently sta mode works provided that you have an AP enabled as well but it doesn't work if you have a sta interface but not an AP. I found that merely reversing the order of the ap and apsta variables in the broadcom.sh script corrects this problem, and the attached patch does exactly that. Signed-off-by: Eric Bishop <ebishop@bu.edu> SVN-Revision: 16256
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, bison, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org