Franz Flasch
d4ac26ec49
kernel: rtl8366-smi: add Realtek switch management via mii-bus
Current version of rtl8366-smi module only supports Realtek switch
managment via two gpio lines. This adds Realtek switch
management via mii_bus. Tested on a Tp-link Archer C2 v1 (Mediatek
SoC mt7620a based)
dts-file configuration should look like this:
rtl8367rb {
compatible = "realtek,rtl8367b";
realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
mii-bus = <&mdio0>;
};
ðernet {
status = "okay";
mtd-mac-address = <&rom 0xf100>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio0: mdio-bus {
status = "okay";
};
};
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Franz Flasch <franz.flasch@gmx.at>
2018-06-25 20:52:18 +02:00
..
2018-06-18 07:10:19 +02:00
2018-06-18 15:27:15 +02:00
2018-06-25 20:52:18 +02:00
2018-06-18 07:10:19 +02:00
2018-06-22 11:01:42 +02:00
2016-06-07 08:58:42 +02:00
2017-04-04 14:06:40 +02:00
2018-06-23 09:47:05 +02:00
2018-06-23 09:47:05 +02:00
2018-06-23 09:47:05 +02:00
2018-06-23 09:47:05 +02:00
2018-04-30 09:01:33 +02:00
2018-04-30 09:01:33 +02:00
2018-05-18 09:10:21 +02:00
2018-05-22 07:55:20 +02:00